Prevent these misaligned operations and prolong the life of your generator set!

The wrong operation of the diesel generator set in the process of use will seriously affect the service life of the diesel generator set, let's explain in detail what are the common wrong operations of the diesel generator set in daily life?

1. The diesel engine is forced to run when the oil supply is insufficient
At this time, the engine will have insufficient oil supply to each friction surface due to insufficient oil supply, which will lead to abnormal wear or burns.
2. Stop immediately with load or sudden load discharge
After the diesel engine generator set is turned off, the circulation of cooling water stops, the heat dissipation capacity is sharply reduced, and the heating parts lose cooling, which is easy to cause overheating of cylinder heads, cylinder liners, cylinder blocks and other parts, resulting in cracks, or excessive expansion of the piston stuck in the cylinder liner.
3. After the cold start, it will run with load without warming up
When the diesel generator set starts the cold engine, due to the high viscosity and poor fluidity of the oil, the oil pump is insufficient, and the friction surface of the machine is poorly lubricated due to the lack of oil, resulting in sharp wear, and even failures such as cylinder pulling and tile burning.
4. Operate when the cooling water is insufficient and the oil temperature is too high
The lack of cooling water of the diesel generator set will reduce its cooling effect, and the diesel engine will overheat due to the lack of effective cooling; If the oil temperature of cooling water and engine oil is too high, it will also cause the diesel engine to overheat. At this time, the cylinder head, cylinder liner, piston assembly and valve of the diesel generator set are mainly subjected to large heating loads, and its mechanical properties such as strength and toughness decline sharply, which increases the deformation of parts, reduces the matching gap between parts, accelerates the wear of parts, and in serious cases, it will also produce cracks and parts jamming faults.